Vickers F12-110-MS-SV-T-000-000-0 3 F12 Motor

Axial rigidity:70.5 N/µm; a:16.8 mm; Characteristic outer ring frequency, BPF0:8.7 Hz; da min:55.5 mm; Characteristic inner ring frequency, BPFI:11.3 Hz; ra max:1 mm; Static load, C0:23.1 kN; Preload value:0.157 kN; r1s min:0.6 mm; Radial rigidity:395 N/µm;

Recommended tightening torque for set screw:5.5 Nm; d1:37.4 mm; s1:30.9 mm; Designation of housing:C205-; B:34.8 mm; C0:7.88 kN; S:17.4 mm; Weight:0.65 kg; A:22 mm; SW:3 mm;

H:112 mm; G:R1/8"; A2:37.3 mm; Z:27.3 mm; C:12.8 kN; A:30.3 mm; Designation of housing:FLE204N-; S:12.7 mm; T max.:100 °C; B:31 mm;

Weight / Kilogram:1.11; r1s min:2 mm; Minimum Buy Quantity:N/A; Brand:NTN; Static load, C0:86 kN; F:65 mm; rs min:2 mm; Product Group:B04270; ra max:2 mm; r1a max:2 mm;

C2:20 mm; Manufacturer Name:NTN; C3:2.7 mm; Category:Bearings; Characteristic inner ring frequency, BPFI:14 Hz; Lubrication hole on outer ring:Non/No; Characteristic cage frequency, FTF:0.46 Hz; D:37 mm; Mass:0.04 kg; Nlim (grease):5,500 rpm;

Recommended tightening torque for set screw:11.5 Nm; L1:60 mm; Designation of open end cover:SCO209-45; N:17mm; A:54 mm; H2:108 mm; s1:20.6 mm; Designation of bearing:US209G2T04; J:146 mm; d:45 mm;

d1:26.5 mm; rs min:1 mm; Nref:16,000 rpm; Characteristic rolling element frequency, BSF:3.61 Hz; Fatigue limit load, Cu:0.42 kN; Static load, C0:6.7 kN; Max operating temperature, Tmax:120 °C; Characteristic cage frequency, FTF:0.37 Hz; f0:12.6; Dynamic load, C:13.7 kN;

d:88.9 mm; D:190 mm; G:5/8-18UNF; C0:108 kN; Weight:8.03 kg; r:3.5; S:40 mm; T min.:-20 °C; T max.:100 °C; SW:7.94 mm;

A5:39.7 mm; Recommended tightening torque for set screw:16.8 Nm; T max.:100 °C; s1:32.55 mm; T min.:-40 °C; Designation of bearing:UC212-36G2T04; B:65.1 mm; C:52.5 kN; S:25.4 mm; C0:32.8 kN;

Designation of open end cover:SCOE204-12; T max.:100 °C; Z:64 mm; SW:3 mm; C0:6.65 kN; Recommended tightening torque for set screw:5.5 Nm; T min.:-20 °C; C:12.8 kN; s1:30.5 mm; G:R1/8";

B:31 mm; C0:6.65 kN; N:11,5mm; Designation of bearing:UC201G2; L:61 mm; A:30.3 mm; C:12.8 kN; H:112 mm; e:19 mm; d:12 mm;

A1:39 mm; C0:23.2 kN; J:159 mm; Recommended tightening torque for set screw:22 Nm; L:206 mm; L1:65 mm; S:19 mm; Weight:2.8 kg; H:57.2 mm; T max.:200 °C;

d:50.8 mm; B1:48.4 mm; T max.:100 °C; H2:124.5 mm; J:176 mm; T min.:-20 °C; A1:35 mm; B:32.5 mm; C0:29.2 kN; H:63.5 mm;

Designation of open end cover:SCOU206-20; A2:41.2 mm; Designation of housing:FLE206N-; T min.:-40 °C; S:15.9 mm; H:142 mm; B:38.1 mm; Designation of bearing:UC206-20G2T04; L:80 mm; G:R1/8";

ra max:0.8 mm; Nlim (grease):2,600 rpm; Characteristic rolling element frequency, BSF:5.89 Hz; Min operating temperature, Tmin:-40 °C; d:53.98 mm; Characteristic outer ring frequency, BPF0:7.28 Hz; Dynamic load, C:171 kN; Fatigue limit load, Cu:25.9 kN; Characteristic cage frequency, FTF:0.43 Hz; e: